Standard Sizes of Snow Plow Blades and How to Select the Right Width for Different Vehicles

The performance of a snow plow blade is highly dependent on proper size selection. Blade width and height determine snow-carrying capacity, plowing efficiency, and vehicle stability. Selecting an oversized blade can overload the vehicle’s front axle, while an undersized blade reduces productivity and increases operating time.

Common Width Ranges

Finished snow plow blades are commonly produced in the following width ranges:

• Light-duty vehicles and pickups: 1500–2100 mm (60"–84")

• Medium-duty trucks: 2400–3000 mm (96"–120")

• Heavy-duty trucks and highway equipment: 3000–4200 mm (120"–168")

The blade width should normally exceed the vehicle’s track width to ensure full snow coverage during angled plowing.

Blade Height and Snow Rolling Capacity

Snow Plow Blade height typically ranges from 450 mm to 900 mm. Taller blades provide higher snow containment and improved rolling performance, which is critical in regions with heavy snowfall. Lower blade profiles are more suitable for urban areas with frequent light snow accumulation.

Vehicle Matching Principles

Blade dimensions should be selected based on:

• Vehicle gross front axle load rating

• Typical operating speed

• Average snow depth per pass

• Road width and maneuverability requirements

Proper matching improves plowing efficiency while reducing mechanical stress on the plow system and vehicle suspension.

Conclusion:

Correct blade sizing is a foundational factor in achieving safe, efficient, and cost-effective snow removal operations.